![]() ![]() ![]() Know that if this process fails, there is another method which will require you to temporarily borrow an old hard drive to launch the Mac OS X installer. ![]() It could be that the disk image you cloned was not correctly dumped to begin with and it is lacking a tiny partition or a boot sector that prevents your Mac from booting it today, or it could be that your USB ports are not behaving correctly. Note 3: If you get a CAN'T OPEN error, it means that you forgot to plug in your USB stick BEFORE powering on the computer, so turn the Mac off and start over from step #1.įinally, sometimes it just doesn't work, no matter what. ![]() Note 2: If you want to boot a non-Macintosh partition, say for instance a PPC Linux distribution, then change tbxi for yaboot If it still doesn't work, you can try this command: Note: You may have to change usb0 for usb1 depending on which port you plugged your USB stick in. Select the DVD from your PowerBook to boot the G5 from and install from there. Turn the G5 on and hold down the OPTION key. Turn the PowerBook on, but hold down the 'T' key. Connect a Firewire cable from the PowerBook to the G5 (with the G5 off). (Please make sure that there are 2 backslashes before :tbxi) Put the install DVD in the PowerBook and then turn it off. Then at the Open Firmware command prompt, type this and press ENTER: Power the computer on (or restart it if it's already running) and immediately.ģ.hold down those 4 keys together: until you see the white Open Firmware screen similar to this:Ĥ. Plug your USB stick or drive in an USB portĢ. To boot a PowerMac (or an iMac, iBook, eMac, etc.) from an USB stick or drive, if you have a G5 or late G4 model, first refer to the boot from CD guide and if it does not work, then follow these instructions:ġ. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |